Reusable High Flow Air Filter For KTM 690 Enduro R 2009-2024 690 SMC R 12-24

Rev up your KTM and let it breathe easy with the high-performance Air Filter. Unlike OEM filters, our filter maximizes airflow surface area, delivering your KTM peak horsepower for any track day adventure.

Features:

• Long-lasting Power - Air filters are durable and provide a better investment for your vehicle. They can last throughout the vehicle's entire lifespan.
• Improved Performance - Properly maintained air filters can enhance performance and fuel efficiency.
• Reusable Filters - You don't need to purchase new filters every time. Just clean and re-oil them, and your engine will remain in good condition. This saves you money on buying new filters.
• Better Filtration/Airflow - Air filters use cotton/oil to provide better filtration and airflow.Regular cleaning and re-oiling not only improve performance but also ensure better filtration for the engine.
• Fuel Economy - Improved airflow leads to better fuel economy. More airflow into the engine reduces fuel consumption, saving you money at the pump.
• Power Boost - Increases vehicle horsepower by 1-4%. The filter adds overall horsepower and torque, although the smaller percentage may not be easily noticeable.
• Washable - Easy to maintain. With a filter oil kit and cleaning products, you can easily clean and re-oil the filter, making it cost-effective.
• Extended Engine Life - Air filters have larger pores or gaps between filtration fibers, allowing more air to pass through and cool the engine, thereby extending its lifespan.
• Innovative Design - Utilizes an oil cotton media layered design, providing more airflow compared to traditional paper filters.
• Easy Installation - Air filters are designed to fit easily into the factory airbox, and with the right tools, installation is a breeze.

Package Included:
1 x High flow air filter

Fitment:

• For Air Filter:

KTM    690    Enduro    2008-2009
KTM    690    Enduro R    2009-2024
KTM    690    SMC    2007-2011
KTM    690    SMC R    2012-2024

Husqvarna     701 Enduro 2016-2024
Husqvarna     701 Supermoto 2016-2024

GAS GAS    ES 700 2022-2024
GAS GAS    SM 700 2022-2024

Routine maintenance Instructions:

• 1. After removing the filter element, use a soft brush or cleaning product to clean the dust attached to the filter.
• 2. Spray the cleaning agent evenly on the surface and wait for 5-8 minutes.
• 3. Rinse the filter with low-pressure water from the clean side to the dirty side to remove dust and dirt.
• 4. After rinsing, gently shake off the water from the filter or let it air dry naturally.
• 5. Do not use an air gun or hairdryer to dry. Using such methods may damage the original material of the filter.
• 6. Squeeze-on oiling (use K&N 99-5050): After air drying, apply a thin layer of K&N red oil on the clean filter element (apply to about 30% of the total area, the oil will gradually penetrate the entire area without dripping). The application of the oil should be light, thin, and even for maximum effectiveness.
• 7. Reinstall the cleaned and oiled filter element, making sure the screws are securely fastened during installation.

Note: It is recommended to clean the filter every 5,000 kilometers to ensure smooth engine breathing and no delay in horsepower output!